Exseed Dabcool W2 Kit

• Brand: Exseed
• Unit: set
• Type: Vaporizer
  
• Net Weight: 349(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Exseed Dabcool W2 Kit is an easy to use portable Water Pipe Vaporizer Electric Dab Rig that made for dabs & concentrates. Designed for waxy oils such as shatter, wax, and other extracts. Dabcool W2 Kit is made of metal and rubber, with a handle at the bottom, which is more comfortable to operate and hold. It is equipped with a 1500mAh high-performance lithium-ion battery to provide powerful heating function and long service life. Dabcool W2 Kit is operated by a button on the front. Press 5 times to turn on the power. LED display shows the current temperature. Dabcool W2 Kit has an intelligent temperature control system and a fast heating time of 20 seconds and provides 4 temperature settings (450℉/ 500℉/ 600℉/ 680℉). Press the power button twice to heat the device, and then press it once to switch between 4 heating settings. Splash guard borosilicate glass body at the top prevents water from sucking out. The atomizer comes with a cap for your dabbing experience. There is a design to increase inhalation resistance and help the atomizer to heat up. Designed with 4 gears, it can support cut tobacco, e-liquid, and tobacco paste. Reminder: water will damage the inner wall of the atomizer, please keep it away from water.

Features

• Metal and Rubber Body

• 1500mAh Large Battery Capacity

• Intelligent Temperature Control System

• Temperature Controllable 4 Gear

• Press to adjust the temperature

• Supports cut tobacco, e-liquid, and tobacco paste

1* Alcohol Pad

1* Micro-USB Super Charger

1* Dab Tool

1* Glass Attachment

1* Atomizer

1* Base

1* Silicone Container

1* Carb Cap

2* Extra Bowl

STEP 1: Fully charge device before first use. White lights pulse while charging, and turn off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ; 4 lights: 75-100%)

STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to base.

X- Do not allow water in lower section!

STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully place the glass into the base.

STEP 4: Hold the button for 3 seconds to turn on device (same way to turn off device). The white lights will flash once and the ambient lights will flash sequentially red>blue>green.

STEP 5: Single click to toggle through heat settings.

1 white light: 450℉       2 white lights: 500℉

3 white lights: 550℉      4 white lights: 600℉

Device will vibrate once while changing heat.

STEP 6: Use Loading Tool to place contents on the bottom surface of the bowl [not the side].

STEP 7: Place carb cap on top of atomizer.

STEP 8: Double click to initiate heat-up [5 seconds avg. ], device will vibrate twice and ambient lights will be red. Single click the button to turn off the heat-up process at anytime.    

STEP 9: Ambient lights will turn green when ready.   ( green lights will be on for 20 seconds, then heat up process automatically stop and ambient lights turn blue)  

STEP 10: Use a cotton swab to clean the chamber after each use.

3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!